- Fast lead times on all quotes
- Fast cut and delivery service
- Cuts up to 8” (203.2mm)
- Cut tolerance: -0.0mm/+1.5mm
- Square and straight-cut edge
- Strip cut up to 3.66M in length
We stock quality extruded aluminium solid rods in the following grades, offering an accurate cut to size service:
6061 T6/T6511: Our rod range is designed to meet the demands of aerospace, motorsport, high-performance applications, as well as general machining and engineering sectors. It offers a structural grade with an excellent strength-to-weight ratio. We supply this material in T6511 temper, providing enhanced stress relief compared to the T6 temper. Diameters are available from 6.35mm to 304.8mm.
6060 T5: Our rod range is ideal for general-purpose and architectural applications. This grade can be chemically brightened, anodised, and powder-coated for enhanced durability and aesthetics. Available diameters range from 10mm to 25mm.
7075 T6/T6511: This is one of the strongest aluminium alloys, offering excellent fatigue strength and moderate machinability. It’s often used in applications where parts are subjected to high stress. While it is not weldable and has lower corrosion resistance compared to other aluminium alloys, its mechanical properties vary depending on the temper of the material. Common applications include motorsport, aircraft structures, and military equipment such as rifles and missiles.
Coils: 5005: Mill finished, this is the most commonly used sheet for fabrication, sheet metal, general purpose and commercial use. We provide this rolled into a coil. Our thickness ranges from 1.6mm to 3mm.
Coils 5052: Mill finish only, this material is specifically designed for marine applications, offering corrosion resistance and medium strength. We supply it rolled into a coil, with thicknesses ranging from 1.6mm to 3mm.
Desc: We stock quality extruded aluminium products that are listed below:
6060 T5: Our miscellaneous range is designed for general-purpose and architectural applications, with options for chemical brightening, anodising, and powder coating.
Plastic Connectors: Available in black.
Desc: We stock quality extruded aluminium square tubes in the following grades and forms.
6060 T5: Our square tube range is designed for general-purpose and architectural applications, with options for chemical brightening, anodising, and powder coating.
Desc: We stock quality extruded aluminium solid rods in the following grades, offering an accurate cut to size service:
6061 T6511: Our flat bar range is designed to support the aerospace, motorsport, high-performance, general machining, hydraulic, and engineering sectors, offering a structural grade with an excellent strength-to-weight ratio. We supply this material in T6511 temper, which provides enhanced stress relief compared to T6 temper. Available sizes range from 25.4mm x 50.8mm to widths of 152.4mm and 177.8mm.
6060 T5: Our flat bar range is ideal for general-purpose and architectural applications, available in both mill finish and clear anodised finish. This grade can also be chemically brightened, anodised, and powder-coated for enhanced durability. Our sizes range from 3mm x 10mm to 25mm x 160mm.
Desc: We stock quality extruded aluminium round tubes in the following grades.
6060 T5 Our tube range is used for general-purpose and architectural applications. This grade can be chemically brightened, anodised and powder-coated.
6061 T6/ 6005A T5: Our tube range is ideal for engineering sectors that demand structural grade with a high strength-to-weight ratio.
Desc: We stock quality extruded aluminium rectangular tube in the following grades and forms, offering an accurate cut to size service:
6060 T5: Our rectangular tube range is suitable for general-purpose and architectural applications. This grade can be chemically brightened, anodised, and powder-coated.
Desc: We offer a range of high-quality rolled aluminium sheeting products in various grades and finishes, complete with precise cut-to-size services and folding capabilities.
5005 H34: Mill finished and PE coated, this is the most commonly used sheet for fabrication, sheet metal work, general purposes, and commercial applications. Our thicknesses range from 0.6mm to 6mm, and we offer this sheet in a variety of widths and lengths.
5052 H32: Mill finish only, this material is designed for marine applications, offering corrosion resistance and medium strength. Available thicknesses range from 1.6mm to 3mm.
Desc: We stock quality extruded aluminium angles in the following grades and forms, we provide this in a mill finish and a clear anodised finish.
Equal and Un-equal
6060 T5: Our channel range is ideal for general-purpose and architectural applications. This grade can be chemically brightened, anodised and powder-coated.
6061 T6/ 6005A T5: Our channel range is used for engineering sectors that demand structural grade with a high strength-to-weight ratio.
Desc: We stock quality extruded aluminium angles in the following grades and forms, we provide this in a mill finish and a clear anodised finish.
Equal and Un-equal
6060 T5: Our angle range is ideal for general-purpose and architectural applications. This grade can be chemically brightened, anodised, and powder-coated.
6061 T6/ 6005A T5: Our angle range is designed for engineering sectors that demand structural grade with an exceptional strength-to-weight ratio.
Desc: We stock quality rolled aluminium plates in the following grades offering an accurate cut to size service:
5083 H116/H112/H321: Our plate range is specifically designed to support the transport and marine sectors, offering structural-strength plates ideal for marine applications. Thicknesses range from 3.0mm to 100.0mm, providing versatility for various project needs.
6061 T651: Our plate range is engineered to support the aerospace, motorsport, high-performance, general machining, and engineering sectors. It offers a structural grade with an exceptional strength-to-weight ratio. We supply this material in T651 temper, which provides added stress relief compared to T6 temper. Thicknesses are available from 6.35mm to 203.2mm.
7075 T651: Our plate range is designed to meet the demands of the motorsport, aerospace, and high-performance sectors, offering excellent strength, toughness, and corrosion resistance. We supply this material in T651 temper, providing enhanced stress relief over T6 temper. Available thicknesses range from 6.35mm to 152.4mm.
Desc: We stock premium extruded aluminium hexagonal rods in 6061 T6 grade. This hex bar range is ideal for aerospace, motorsport, high-performance applications, as well as general machining and engineering sectors, offering a structural grade with an excellent strength-to-weight ratio. Available sizes range from 10mm to 32mm.
Desc: Our 5-bar treadplate features a semi-bright finish, making it ideal for marine applications. Thicknesses range from 1.6mm to 6mm, and we offer a variety of widths and lengths. Additionally, we provide precise cut-to-size services and folding capabilities to meet your specific requirements.
Propeller Plate 3003 H22: Our single-bar treadplate is chemically brightened with a polished finish, making it perfect for marine applications. Available in thicknesses ranging from 1.6mm to 4.76mm, we also offer precise cut-to-size services and folding capabilities to suit your needs.
We stock quality extruded aluminium Solid Square Bars in the following grades, offering an accurate cut to size service:
6061 T6511: Our Square Bar range is used to support the Aerospace, Motorsport, high performance, hydraulic/general machining and engineering sectors. It provides a structural grade with a high strength to weight ratio. We supply this material in a T6511 temper which provides additional stress relief to T6 Temper. Our size range is from 25.4mm to 152.4mm.
6060 T5: Our Square Bar range is versatile, ideal for both general-purpose applications and architectural projects. This grade can be chemically brightened, anodised, and powder-coated to meet various design and functional requirements. Available in sizes ranging from 6mm to 65mm.
